Mark Bass LM800 Little Mark III 800 watt bass head
Special Price
AUD1,295.00
Regular Price
AUD1,795.00
Out of stock
Overview
The Mark Bass LM800 Little Mark III 800 watt bass head is a quality compact yet powerful bass head. 800 watts in a tiny head that actually sounds good. Check it out at Music Park's Perth shop
Mark Bass LM800 Little Mark III 800 watt bass head at Music Park
Mark Bass LM800 Little Mark III 800 watt bass head in Perth
The Little Mark 800 is basically a Little Mark III with an 800W power amp. This high-power head is created for those who need simple, intuitive and effective controls but also like to have a large supply of power and serious headroom.
A great choice for big-stage applications, and for louder bands. Its sound is exceptionally warm and clear, both at low and high volumes. The ultra-fast response of the power amp allows the best reproduction of every minute detail in your playing. The new DI output features a pre-post EQ switch and output level control, so you can optimize the signal you send to the mixer or recording unit.
INPUTS
INPUT: impedance 500 Kohm, max. voltage 15 Vpp
BALANCED INPUT (XLR): impedance 100 Kohm, max. voltage 25 Vpp
EFFECT RETURN: impedance 33 Kohm, max. voltage 10 Vpp
CONTROLS
GAIN: -60 dB to +23 dB range
MASTER VOLUME
LINE OUT LEVEL
GROUND LIFT (switch on rear panel)
PRE/POST EQ (switch on rear panel)
EQUALIZATION
LOW: center frequency: 40 Hz; level: ±16 dB
LOW MID: center frequency: 360 Hz, level: ±16 dB
HIGH MID: center frequency: 800 Hz, level: ±16 dB
HIGH: center frequency: 10 kHz, level: ±16 dB
VPF (Variable Pre-shape Filter): center frequency 380 Hz
VLE (Vintage Loudspeaker Emulator): frequency range 250 Hz-20 kHz
OUTPUTS
LINE OUT: balanced XLR, max. voltage 20 Vpp
EFFECT SEND: unbalanced, max. voltage 20 Vpp (pre-EQ)
TUNER OUT: unbalanced, max. voltage 2 Vpp
SPEAKER OUT: speakon/1/4" combo, 1/4"
OTHER
WEIGHT: 6.39 lbs / 2.9 Kg
WIDTH: 10.87 in. / 27.6 cm
DEPTH: 9.84 in. / 25 cm
HEIGHT: 3.27 in. / 8.3 cm
OUTPUT POWER: 800W RMS @ 4 ohms / 500W RMS @ 8 ohms
POWER REQUIREMENT:100/120V; 230V; 240V - 50/60Hz (Voltage is factory preset according to region of sale)
Minimum ohm load for all Markbass heads is 4 ohms.
Markbass amps/combos are manufactured to be sold and used in the country of purchase, and they are factory preset to that country’s voltage. Due to homologation issues, the voltage may not be changed.
Rack ears do not come included with this head.
Product specifications are subject to change without notice.
Music Park in Perth Western Australia carry a good range of Mark Bass heads and cabs
Weight | 2.900000 |
---|---|
Manufacturer | Markbass |
Amplifier Type | Head Unit |
Amplification Method | Solid State |
Modelling Amplifier (Y/N) | No |
Amplifier Wattage | 800 / 4 ohms 500 / 8 ohms |
Write Your Own Review